CBF S.r.l.

2/2 solenoid directional valve with emergency screw : EV162*-VE

2011-02-22 17:16:01

Maximum flow	150 l/min 40 gpm
Maximum pressure	300 bar 4350 psi

Model	Ports 1, 2	Hydraulic scheme
EV1620-34-VE	G 3/4
EV1620-10-VE	G 1
EV1621-34-VE	G 3/4
EV1621-10-VE	G 1
EV1622-34-VE	G 3/4
EV1622-10-VE	G 1
EV1623-34-VE	G 3/4
EV1623-10-VE	G 1
EV1620M-34-VE	G 3/4
EV1620M-10-VE	G 1
EV1621M-34-VE	G 3/4
EV1621M-10-VE	G 1
EV1622M-34-VE	G 3/4
EV1622M-10-VE	G 1
EV1623M-34-VE	G 3/4
EV1623M-10-VE	G 1

COIL SOLD SEPARATELY

Performances and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filtration 25 μm

2/2 solenoid directional valve with emergency screw : EV102*-VE

2011-02-22 17:10:05

Maximum flow	70 l/min 18 gpm
Maximum pressure	350 bar 5075 psi

Model	Ports 1, 2	Hydraulic scheme
EV1020-12-VE	G 1/2
EV1020-34-VE	G 3/4
EV1021-12-VE	G 1/2
EV1021-34-VE	G 3/4
EV1022-12-VE	G 1/2
EV1022-34-VE	G 3/4
EV1023-12-VE	G 1/2
EV1023-34-VE	G 3/4
EV1020M-12-VE	G 1/2
EV1020M-34-VE	G 3/4
EV1021M-12-VE	G 1/2
EV1021M-34-VE	G 3/4
EV1022M-12-VE	G 1/2
EV1022M-34-VE	G 3/4
EV1023M-12-VE	G 1/2
EV1023M-34-VE	G 3/4

COIL SOLD SEPARATELY

Performances and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filtration 25 μm

2/2 solenoid directional valve with emergency screw : EV082*-VE

2011-02-22 16:35:05

Maximum flow	40 l/min 10.6 gpm
Maximum pressure	350 bar 5075 psi

Model	Ports 1, 2	Hydraulic scheme
EV0820-14-VE	G 1/4
EV0820-38-VE	G 3/8
EV0820-12-VE	G 1/2
EV0821-14-VE	G 1/4
EV0821-38-VE	G 3/8
EV0821-12-VE	G 1/2
EV0822-14-VE	G 1/4
EV0822-38-VE	G 3/8
EV0822-12-VE	G 1/2
EV0823-14-VE	G 1/4
EV0823-38-VE	G 3/8
EV0823-12-VE	G 1/2
EV0820M-14-VE	G 1/4
EV0820M-38-VE	G 3/8
EV0820M-12-VE	G 1/2
EV0821M-14-VE	G 1/4
EV0821M-38-VE	G 3/8
EV0821M-12-VE	G 1/2
EV0822M-14-VE	G 1/4
EV0822M-38-VE	G 3/8
EV0822M-12-VE	G 1/2
EV0823M-14-VE	G 1/4
EV0823M-38-VE	G 3/8
EV0823M-12-VE	G 1/2

COIL SOLD SEPARATELY

Performances and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filtration 25 μm

2/2 solenoid directional valve : EV162*

2011-02-22 16:01:18

Maximum flow	150 l/min 40 gpm
Maximum pressure	300 bar 4350 psi

Model	Ports 1, 2	Hydraulic scheme
EV1620-34	G 3/4
EV1620-10	G 1
EV1621-34	G 3/4
EV1621-10	G 1
EV1622-34	G 3/4
EV1622-10	G 1
EV1623-34	G 3/4
EV1623-10	G 1
EV1620M-34	G 3/4
EV1620M-10	G 1
EV1621M-34	G 3/4
EV1621M-10	G 1
EV1622M-34	G 3/4
EV1622M-10	G 1
EV1623M-34	G 3/4
EV1623M-10	G 1

COIL SOLD SEPARATELY

Performances and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filtration 25 μm

2/2 solenoid directional valve : EV102*

2011-02-22 15:46:51

Maximum flow	70 l/min 18 gpm
Maximum pressure	350 bar 5075 psi

Model	Ports 1, 2	Hydraulic scheme
EV1020-12	G 1/2
EV1020-34	G 3/4
EV1021-12	G 1/2
EV1021-34	G 3/4
EV1022-12	G 1/2
EV1022-34	G 3/4
EV1023-12	G 1/2
EV1023-34	G 3/4
EV1020M-12	G 1/2
EV1020M-34	G 3/4
EV1021M-12	G 1/2
EV1021M-34	G 3/4
EV1022M-12	G 1/2
EV1022M-34	G 3/4
EV1023M-12	G 1/2
EV1023M-34	G 3/4

COIL SOLD SEPARATELY

Performances and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filtration 25 μm

2/2 solenoid directional valve : EV082*

2011-02-22 14:39:44

Maximum flow	40 l/min 10.6 gpm
Maximum pressure	350 bar 5075 psi

Model	Ports 1, 2	Hydraulic scheme
EV0820-14	G 1/4
EV0820-38	G 3/8
EV0820-12	G 1/2
EV0821-14	G 1/4
EV0821-38	G 3/8
EV0821-12	G 1/2
EV0822-14	G 1/4
EV0822-38	G 3/8
EV0822-12	G 1/2
EV0823-14	G 1/4
EV0823-38	G 3/8
EV0823-12	G 1/2
EV0820M-14	G 1/4
EV0820M-38	G 3/8
EV0820M-12	G 1/2
EV0821M-14	G 1/4
EV0821M-38	G 3/8
EV0821M-12	G 1/2
EV0822M-14	G 1/4
EV0822M-38	G 3/8
EV0822M-12	G 1/2
EV0823M-14	G 1/4
EV0823M-38	G 3/8
EV0823M-12	G 1/2

COIL SOLD SEPARATELY

Performances and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filtration 25 μm

2/2 solenoid directional valve - cartridge type : EV202*-C

2011-02-22 14:28:48

Maximum flow	200 l/min 53 gpm
Maximum pressure	300 bar 4350 psi
Installation torque	230÷250 Nm 170÷190 lbf ft

Model	Hydraulic scheme
EV2020-C
EV2020M-C
EV2021-C
EV2021M-C
EV2022-C
EV2022M-C
EV2023-C
EV2023M-C

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C (122 F).
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C (-4 F ÷ +194 F)
Absolute filitration 25 μm

2/2 solenoid directional valve - cartridge type : EV162*-C

2011-02-22 13:55:36

Maximum flow	150 l/min 40 gpm
Maximum pressure	300 bar 4350 psi
Installation torque	180÷210 Nm 130÷150 lbf ft

Model	Hydraulic scheme
EV1620-C
EV1620M-C
EV1621-C
EV1621M-C
EV1622-C
EV1622M-C
EV1623-C
EV1623M-C

2/2 solenoid directional valve - cartridge type : EV102*-C

2010-10-25 14:29:42

Maximum flow	70 l/min 18.5 gpm
Maximum pressure	350 bar 5000 psi
Installation torque	45÷50 Nm 33÷37 lbf ft

Model	Hydraulic scheme
EV1020-C
EV1020M-C
EV1021-C
EV1021M-C
EV1022-C
EV1022M-C
EV1023-C
EV1023M-C

Direct acting, differential area relief valve - cartridge type : VLPD10-C

2010-10-05 14:23:19

Maximum flow	40 l/min 10.6 gpm
Maximum pressure	350 bar 5075 psi
Installation torque	45÷50 Nm 33÷37 lbf ft

Setting
Code	Standard setting	Adj. pressure range
01	80 bar 1160 psi	20÷100 bar 290÷1450 psi
02	180 bar 2610 psi	40÷250 bar 580÷3625 psi
03	250 bar 3625 psi	60÷350 bar 870÷5075 psi

Adjustment
A Leakproof hex socket screw	B Handknob and locknut	C Sealing cap	D Cap

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

Direct acting, relief valve - cartridge type : VLP4010-C

2010-10-05 14:17:35

Maximum flow	40 l/min 10.6 gpm
Maximum pressure	350 bar 5075 psi
Installation torque	45÷50 Nm 33÷37 lbf ft

Setting
Code	Standard setting	Adj. pressure range
01	80 bar 1160 psi	20÷100 bar 290÷1450 psi
02	180 bar 2610 psi	40÷250 bar 580÷3625 psi
03	250 bar 3625 psi	60÷350 bar 870÷5075 psi

Adjustment
A Leakproof hex socket screw	B Handknob and locknut	C Sealing cap	D Cap

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

2/2 solenoid directional valve - cartridge type : EV082*-C

2010-09-15 09:38:46

Maximum flow	40 l/min 10.6 gpm
Maximum pressure	350 bar 5000 psi
Installation torque	27÷30 Nm 20÷23 lbf ft

Model	Hydraulic scheme
EV0820-C
EV0820M-C
EV0821-C
EV0821M-C
EV0822-C
EV0822M-C
EV0823-C
EV0823M-C

Unidirectional Needle valve : SPU

2010-09-10 12:00:28

Type	P, U	C	L	L1	D	H	H1	Maximum flow	Maximum pressure
SPU-14	G 1/4	20	66	26	30	17	33	15 l/min 4 gpm	350 bar 5075 psi
SPU-38	G 3/8	25	75	30	35	20	33	30 l/min 8 gpm	350 bar 5075 psi
SPU-12	G 1/2	30	85	33	40	21	33	45 l/min 12 gpm	350 bar 5075 psi
SPU-34	G 3/4	40	110	46	50	25	33	85 l/min 22 gpm	350 bar 5075 psi

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

Needle valve : SP

2010-09-10 11:45:10

Type	P, U	C	L	L1	D	H	H1	Maximum flow	Maximum pressure
SP-14	G 1/4	20	52	26	30	17	33	15 l/min 4 gpm	350 bar 5075 psi
SP-38	G 3/8	25	60	30	35	20	33	30 l/min 8 gpm	350 bar 5075 psi
SP-12	G 1/2	30	66	33	40	21	33	45 l/min 12 gpm	350 bar 5075 psi
SP-34	G 3/4	40	92	46	50	25	33	85 l/min 22 gpm	350 bar 5075 psi

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

Leaflet : FASCICOLO

2010-06-23 16:30:11

High-low pressure, relief and unloading valve - direct mounting on gear pumps : VEP40-FPG11-38

2010-02-18 17:22:42

Maximum flow high pressure	15 l/min 4 gpm
Maximum flow low pressure	25 l/min 6.6 gpm
Maximum pressure AP	350 bar 5000 psi
Maximum pressure BP	100 bar 1450 psi
Setting	80 bar 1160 psi
Adj. pressure range	20÷100 bar 290÷1450 psi

Performances and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C (122 F). Recommended viscosity 10 ÷ 420 cSt, working temperature - 20÷+90 °C (-4 F÷194 F). Absolute filtration 25 μm.

Single effect relief valve, sandwich mounting NG10 : VLP80-S-FC5

2009-11-18 15:16:53

Type	Maximum flow	Maximum pressure
VLP80-S-F-C5	80 l/min 20 gpm	280 bar 4060 psi

Taratura
Code	Standard setting bar (Q= 5l/min)	Adj. Pressure range bar
00	40	5÷40
01	80	20÷100
02	180	40÷250
03	250	60÷350

Regolazioni
A Leakproof hex socket srcew	B Handknob and locknut	C Sealing cap	D Cap

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

Double effect relief valve, sandwich mounting NG10 : VLP80-DI-FC5

2009-11-18 14:54:28

Type	Maximum flow	Maximum pressure
VLP80-DI-F-C5	80 l/min 20 gpm	280 bar 4060 psi

Taratura
Code	Standard setting bar (Q= 5l/min)	Adj. Pressure range bar
00	40	5÷40
01	80	20÷100
02	180	40÷250
03	250	60÷350

Regolazioni
A Leakproof hex socket srcew	B Handknob and locknut	C Sealing cap	D Cap

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

Double effect relief valve, sandwich mounting NG10 : VLP80-D-FC5

2009-11-18 14:38:31

Type	Maximum flow	Maximum pressure
VLP80-D-F-C5	80 l/min 20 gpm	280 bar 4060 psi

Taratura
Code	Standard setting bar (Q= 5l/min)	Adj. Pressure range bar
00	40	5÷40
01	80	20÷100
02	180	40÷250
03	250	60÷350

Regolazioni
A Leakproof hex socket srcew	B Handknob and locknut	C Sealing cap	D Cap

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

Double effect relief valve, sandwich mounting NG6 : VLP40-DI-FC3

2009-11-18 14:31:00

Type	Maximum flow	Maximum pressure
VLP40-D-F-C3	40 l/min 10 gpm	280 bar 4060 psi

Taratura
Code	Standard setting bar (Q= 5l/min)	Adj. Pressure range bar
00	40	5÷40
01	80	20÷100
02	180	40÷250
03	250	60÷350

Regolazioni
A Leakproof hex socket srcew	B Handknob and locknut	C Sealing cap	D Cap

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

High - low pressure, relief and unloading valve : VEP-VLP150

2009-11-18 14:18:37

Maximum flow high pressure (AP)	40 l/min 10 gpm
Maximum flow low pressure (BP)	130 l/min 35 gpm
Maximum pressure	350

Setting
Code	Standard setting bar (Q= 5l/min)		Adjustment pressure range bar
Code	BP	AP	BP	AP
01	80	80	20÷100	20÷100
02	80	180	20÷100	40÷250
03	80	250	20÷100	60÷350

Options
A Leakproof hex socket screw	B Handknob and locknut	C Sealing cap	D Cap

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

CBF S.r.l.

2/2 solenoid directional valve with emergency screw : EV162*-VE

2/2 solenoid directional valve with emergency screw : EV102*-VE

2/2 solenoid directional valve with emergency screw : EV082*-VE

2/2 solenoid directional valve : EV162*

2/2 solenoid directional valve : EV102*

2/2 solenoid directional valve : EV082*

2/2 solenoid directional valve - cartridge type : EV202*-C

2/2 solenoid directional valve - cartridge type : EV162*-C

2/2 solenoid directional valve - cartridge type : EV102*-C

Direct acting, differential area relief valve - cartridge type : VLPD10-C

Direct acting, relief valve - cartridge type : VLP4010-C

2/2 solenoid directional valve - cartridge type : EV082*-C

Unidirectional Needle valve : SPU

Needle valve : SP

Leaflet : FASCICOLO

High-low pressure, relief and unloading valve - direct mounting on gear pumps : VEP40-FPG11-38

Single effect relief valve, sandwich mounting  NG10 : VLP80-S-FC5

Double effect relief valve, sandwich mounting  NG10 : VLP80-DI-FC5

Double effect relief valve, sandwich mounting  NG10 : VLP80-D-FC5

Double effect relief valve, sandwich mounting  NG6 : VLP40-DI-FC3

High - low pressure, relief and unloading valve : VEP-VLP150

Single effect relief valve, sandwich mounting NG10 : VLP80-S-FC5

Double effect relief valve, sandwich mounting NG10 : VLP80-DI-FC5

Double effect relief valve, sandwich mounting NG10 : VLP80-D-FC5

Double effect relief valve, sandwich mounting NG6 : VLP40-DI-FC3