Hose burst valve : VPN-MF

2009-01-08 14:17:01

After assembly procedure the valves are respectively set at about 0.5mm (for G=1/4" gas and G=3/8" gas) and 0.7mm (for G=1/2" gas and G=3/4" gas). Dopo il montaggio le valvole risultano regolate rispettivamente a circa 0.5mm (per G=1/4" gas e G=3/8" gas) e 0.7mm (per G=1/2" gas e G=3/4" gas).

Type	G	L	L1	L2	L3	Ch	Max flow l/min	Max pressure bar
VPN-14-MF / VPN-14-FF	1/4"GAS	10	50	13	48	19	25	350
VPN-38-MF / VPN-38-FF	3/8"GAS	12	55	13	52	22	50	350
VPN-12-MF / VPN-12-FF	1/2"GAS	14	70	14	60	27	80	350
VPN-34-MF / VPN-34-FF	3/4"GAS	16	75	17	72	32	150	350

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

Screw-in cartridge hose burst valve : VPN

2009-01-08 12:09:58

After assembly procedure the valves are respectively set at about 0.5mm (for G=1/4" gas and G=3/8" gas) and 0.7mm (for G=1/2" gas and G=3/4" gas).

Type	G	A	B	C	D	E	H	ch	Torque Nm	Max flow l/min	Max pressure bar
VPN-14	1/4"GAS	8.5	17.5	8	9.5	2.4	11	5.5	2	25	350
VPN-38	3/8"GAS	10.5	23	10.5	12.5	3.5	11	5.5	3	50	350
VPN-12	1/2"GAS	13	25	12	15	4.5	15	7	4	80	350
VPN-34	3/4"GAS	16	30.5	17	18	6	16	7	10	150	350

Performaces and calibrations are carried out by using hydraulic oil with 30 cSt viscosity at 50°C
Recommended viscosity 10 ÷ 420 cSt
Working temperature -20 ÷ +90 °C
Absolute filitration 25 μm

CBF S.r.l.

Hose burst valve : VPN-MF

Screw-in cartridge hose burst valve : VPN